vCAC 6.0 build-out to distributed model – Part 2: vPostgres

Written by Sam McGeown
Published on 24/6/2014 - Read in about 4 min (761 words)

This is the second article in a series about how to build-out a simple vCAC 6 installation to a distributed model.

The diagram below shows the deployment at the end of this part, with vPostgres deployed and the vCAC Appliance running from the remote database.

vCAC topology with vPostgre

vCAC deploymnent with vPostgres deployed

An overview of the steps required are below:

  • Issue and install certificates
  • Deploy an external vPostgres appliance and migrate the vCAC database
  • Configure load balancing
  • Deploy a second vCAC appliance and configure clustering
  • Install and configure additional IaaS server
  • Deploy vCenter Orchestrator Appliance cluster

Create the required DNS records

First of all, create DNS records for your vPostgres database server – you need both an A and PTR record. Most VMware appliances will check for a reverse DNS lookup when they boot and will set the hostname accordingly.

I’m calling mine vcac-pg-01:

Deploy the vPostgres OVF

Deploying the OVF is really very simple and really doesn’t take any explaining! vPostgres is free for non-production use so there’s no problem having a play in your lab.

Initial Configuration

Once the appliance has finished booting (wait for the below screen) log onto the web management console using the DNS FQDN on port 5480 – e.g. mine is on https://vcac-pg-01.definit.local:5480

Log on using the password you specified in the OVF deployment and check that the appliance has picked up the hostname correctly. There’s no need to change anything else here (though, if you’re reading VMware, an NTP section the same as the rest of your appliances would be nice!)

Open the VM console on the DB server and edit the NTP configuration using “vi /etc/ntp.conf” and insert the same NTP servers you’ve configured for your VCAC appliance – e.g.

server 0.uk.pool.ntp.org
server 1.uk.pool.ntp.org
server 2.uk.pool.ntp.org

Save and exit the vi editor, then start the NTP server using “rcntp start” (use reload if NTP is already running). Check the sync using “rcntp ntptimeset”, and “rcntp status”.

Configure vPostgres for VCAC

Log onto the vPostgres instance using https://vcac-pg-01.definit.local:8443 – use the password configured in the OVF deployment.

Once logged on, expand the Databases node and select the postgres database. In the top right, you can now click on the “Enter SQL” button:

First, we need to create a user for use with vcac:

CREATE USER vcac WITH NOCREATEDB NOCREATEROLE NOCREATEUSER INHERIT LOGIN ENCRYPTED password 'mypassword';

Then create a database with the new user as the owner:

CREATE DATABASE vcacdb WITH OWNER vcac;

Don’t worry if it doesn’t show up immediately, or with a refresh, I had to log out and log back in again.

Finally, select the vcacdb database, open the SQL window and create the extensions required for VCAC:

CREATE EXTENSION "hstore";
CREATE EXTENSION "uuid-ossp";

Migrate the vCAC Appliance Database

Open PuTTY and connect to the vCAC Appliance – log in using the root credentials.

Change to the user “vcac” which has permissions to the embedded PostgreSQL databse.

su – vcac

Move to the PostgreSQL install folder

 

cd /opt/vmware/vpostgres/9.2/bin

Dump the database “vcac” and pipe it into a PSQL command to push it to the remote vPostgres server’s database – the –h parameter is the remote host and the final argument is the new DB name created earlier.

 

./pg_dump vcac | ./psql -h vcac-pg-01.definit.local vcacdb

Enter the password for the user “vcac” on the new server (the password from the query in the previous section). There will be a whole load of SQL commands on screen, including some warnings about “public”  at the end – you can safely ignore those.

Configure the vCAC Appliance to point to the vPostgres instance

The database is now migrated, but vCAC needs to know where to look, so log into the management console (e.g. https://vcac-app-01.definit.local:5480) and go to the vCAC Settings > Database tab. Enter the details for the new instance and click “Save Settings” – you should see a message saying “Database configuration is updated, vCAC is restarted”

Tidy up behind you

Since the embedded database is no longer required, we should now turn that off – as well as the embedded vCO services, which cannot be configured to run on an external database. Jump back on the SSH session to the vCAC Appliance and issue the following commands

service vpostgres stop
service vco-server stop
chkconfig vpostgres off
chkconfig vco-server off

Just for peace of mind, I like to log in to my appliance at this point to ensure everything is as expected, and any configurations are carried across

That concludes part two of this series, stay tuned for part 3 which is all about the load balancing!

Share this post