DefinIT

NSX-T 2.0 Lab Build: Edge Installation

| 23/10/2017 | Tags: , , , , ,

Disclaimer! I am learning NSX-T, part of my learning is to deploy in my lab – if I contradict the official docs then go with the docs!

Lab Environment

This NSX-T lab environment is built as a nested lab on my physical hosts. There are four physical ESXi hosts, onto which I will deploy three ESXi VMs, a vCenter Server Appliance, NSX Manager, an NSX Controller cluster, and two NSX Edge Nodes.

Physical, virtual and nested components of the NSX-T lab

Deployment Plan

I will follow the deployment plan from the NSX-T 2.0 documentation:

  • Install NSX Manager.
  • Install NSX Controllers.
    • Join NSX Controllers with the management plane.
    • Initialize the control cluster to create a master controller.
    • Join NSX Controllers into a control cluster.
  • Join hypervisor hosts with the management plane.
  • Install NSX Edges.
    • Join NSX Edges with the management plane.
  • Create transport zones and transport nodes.

When this post series is complete, the network topology should be something like this, with two hostswitches configured. The ESXi Hosts will have a Tunnel Endpoint IP address, as will the Edge. The Edge will also have an interface configured for a VLAN uplink.

The NSX-T Transport Node network configuration

In this post I will walk through configuring the Transport Zone, Transport Nodes, Edge Cluster and other configuration required to support the deployment.
(more…)

Configuring a remote access SSL VPN with VMware NSX

| 11/09/2014 | Tags: , , , , , ,

The NSX Edge Gateway comes pre-armed with the ability to provide an SSL VPN for remote access into your network. This isn’t a new feature (SSL VPN was available in vCloud Networking and Security), but it’s worth a run through. I’m configuring remote access to my Lab, since it’s often useful to access it when on a client site, but traditional VPN connections are often blocked on corporate networks where HTTPS isn’t. (more…)