DefinIT
vRealize Lifecycle Manager 1.2 VC data collection fails when NSX-T hostswitches are in use
Sam
18/04/2018

vRLCM LogoWhen vRealize Lifecycle Manager 1.2 was released recently, I was keen to get it installed in my lab, since I maintain several vRealize Automation deployments for development and testing, as well as performing upgrades. With vRLCM I can reduce the administrative overhead of managing the environments, as well as easily migrate content between environments (I’ll be blogging on some of these cool new features soon).

However, I hit a snag when I began to import my existing environment – I couldn’t get the vCenter data collection to run.

Data Collection Failed (more…)

NSX-T 2.0 Lab Build: Transport Zones and Transport Nodes
Sam
23/10/2017

Disclaimer! I am learning NSX-T, part of my learning is to deploy in my lab – if I contradict the official docs then go with the docs!

Lab Environment

This NSX-T lab environment is built as a nested lab on my physical hosts. There are four physical ESXi hosts, onto which I will deploy three ESXi VMs, a vCenter Server Appliance, NSX Manager, an NSX Controller cluster, and two NSX Edge Nodes.

Physical, virtual and nested components of the NSX-T lab

Deployment Plan

I will follow the deployment plan from the NSX-T 2.0 documentation:

  • Install NSX Manager.
  • Install NSX Controllers.
    • Join NSX Controllers with the management plane.
    • Initialize the control cluster to create a master controller.
    • Join NSX Controllers into a control cluster.
  • Join hypervisor hosts with the management plane.
  • Install NSX Edges.
    • Join NSX Edges with the management plane.
  • Create transport zones and transport nodes.

When this post series is complete, the network topology should be something like this, with two hostswitches configured. The ESXi Hosts will have a Tunnel Endpoint IP address, as will the Edge. The Edge will also have an interface configured for a VLAN uplink.

The NSX-T Transport Node network configuration

In this post I will walk through configuring the Transport Zone, Transport Nodes, Edge Cluster and other configuration required to support the deployment.
(more…)