VLAN

Written by Sam McGeown on 23/10/2017
Published under Networking, NSX, VMware and vSphere
Disclaimer! I am learning NSX-T, part of my learning is to deploy in my lab - if I contradict the official docs then go with the docs! Lab Environment This NSX-T lab environment is built as a nested lab on my physical hosts. There are four physical ESXi hosts, onto which I will deploy three ESXi VMs, a vCenter Server Appliance, NSX Manager, an NSX Controller cluster, and two NSX Edge Nodes.
Written by Sam McGeown on 20/10/2014
Published under Networking, VMware and vRealize Automation
I am aware that that’s not a catchy blog post title. In fact, it doesn’t even really describe the problem or solution very well - for that I need to go into a little bit more depth! Suppose I have configured a Reservation with two Networks ticked (“192.168.1.0-VLAN1” and “192.168.10.0-VLAN10”). As you can see in the screenshot below, each of the networks has a Network Profile created and assigned with a network pool to provide IP addressing for the VMs.
Written by Sam McGeown on 29/6/2011
Published under Microsoft and Networking
It’s a fairly common requirement – setting up a guest WiFi network that is secure from the rest of your LAN. You need a secure WLAN access for the domain laptops which has full access to the Server and Client VLANs, but you also need a guest WLAN for visitors to the office which only allows internet access. Since the budget is limited, this must all be accomplished via a single Access Point – for this article, the access point is a Cisco WAP4410N.